I
-
Getting Started
Entering Measurement Parameters
Entering Source Power
1. Press the
(POWER)
key to access the power level
softkey
menu.
level
2.
To
change the power level to 3
dBm,
press Level
0,
and
dBm
or
pEq.
3.
To change the power level to -1.6
dBm,
press Level
(--1.6)
dBm
or
[rnj.
NOTE
Your analyzer’s power level (depending upon its option configuration) may not be settable to below
0
dElm.
4. To change the power level that will always be restored when you preset
the analyzer, press
Preset
PPT
Level 12.5) and
dBm
or
@YEi?].
This
entry does not affect the current power level.
2-8
I-
深圳市盛腾仪器仪表有限公司 Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com
To Next Page
Loading...
Need help?
General
