104
# Enable MAC authentication globally.
[Device] mac-authentication
# Enable MAC authentication on port GigabitEthernet 1/0/1.
[Device] mac-authentication interface gigabitethernet 1/0/1
# Specify the ISP domain for MAC authentication.
[Device] mac-authentication domain 2000
# Set the MAC authentication timers.
[Device] mac-authentication timer offline-detect 180
[Device] mac-authentication timer quiet 180
# Specify username aaa and password 123 456 for the account shared by MAC authentication users.
[Device] mac-authentication user-name-format fixed account aaa password simple 123456
2. Verify the configuration.
# Display MAC authentication settings and statistics.
<Device> display mac-authentication
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 180s
Quiet period is 180s.
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 1
Current domain is 2000
Silent Mac User info:
MAC ADDR From Port Port Index
Gigabitethernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 1, failed: 0
Max number of on-line users is 1024
Current online user number is 1
MAC ADDR Authenticate state Auth Index
00e0-fc12-3456 MAC_AUTHENTICATOR_SUCCESS 29
# After a user passes MAC authentication, use the display connection command to display online user
information.
<Device> display connection
Slot: 1
Index=29 ,Username=aaa@2000
IP=N/A
IPv6=N/A
MAC=00e0-fc12-3456
Total 1 connection(s) matched on slot 1.
Total 1 connection(s) matched.
To Next Page
Loading...
Need help?
General