EasyManuals Logo
Home>HP>Switch>A5830 Series

HP A5830 Series User Manual

HP A5830 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #235 background imageLoading...
Page #235 background image
227
Configuring source MAC address-based ARP attack
detection
With this feature enabled, the device checks the source MAC address of ARP packets delivered to the
CPU. It detects an attack when one MAC address sends more ARP packets in 5 seconds than the
specified threshold. The device adds the MAC address to the attack detection table.
Before the attack detection entry is aged out, the device uses either of the following detection modes to
respond to the detected attack:
Monitor mode—Generates a log message.
Filter mode—Generates a log message and filters out subsequent ARP packets from the attacking
MAC address.
You can also configure protected MAC addresses to exclude a gateway or server from detection. A
protected MAC address is excluded from ARP attack detection even if it is an attacker.
Configuration procedure
To configure source MAC address-based ARP attack detection:
To do… Use the command… Remarks
1. Enter system view.
system-view
2. Enable source MAC address-
based ARP attack detection
and specify the detection
mode.
arp anti-attack source-mac { filter
| monitor }
Required
Disabled by default
3. Configure the threshold.
arp anti-attack source-mac
threshold threshold-value
Optional
50 by default
4. Configure the age timer for
ARP attack detection entries.
arp anti-attack source-mac aging-
time time
Optional
300 seconds by default
5. Configure protected MAC
addresses.
arp anti-attack source-mac
exclude-mac mac-address&<1-
10>
Optional
Not configured by default
After an ARP attack detection entry expires, ARP packets sourced from the MAC address in the entry can
be processed normally.
Displaying and maintaining source MAC address-based ARP
attack detection
To do… Use the command… Remarks
Display attacking MAC addresses detected
by source MAC address-based ARP attack
detection
display arp anti-attack source-mac {
slot slot-number | interface interface-
type interface-number } [ | { begin |
exclude | include } regular-
expression ]
Available in any
view

Table of Contents

Other manuals for HP A5830 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5830 Series and is the answer not in the manual?

HP A5830 Series Specifications

General IconGeneral
BrandHP
ModelA5830 Series
CategorySwitch
LanguageEnglish

Related product manuals