EasyManuals Logo
Home>HP>Switch>A5830 Series

HP A5830 Series User Manual

HP A5830 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
133
To do… Use the command… Remarks
4. Configure the minimum
password length for the user
group.
password-control length length
Optional.
By default, the minimum password
length configured in system view
is used.
5. Configure the password
composition policy for the
user group.
password-control composition
type-number type-number [ type-
length type-length ]
Optional.
By default, the password
composition policy configured in
system view is used.
Setting local user password control parameters
To do… Use the command… Remarks
1. Enter system view.
system-view
2. Create a local user and enter
local user view.
local-user user-name
3. Configure the password
aging time for the local user.
password-control aging aging-
time
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no aging time
is configured for the user group,
the setting in system view is used.
4. Configure the minimum
password length for the local
user.
password-control length length
Optional.
By default, the setting for the user
group to which the local user
belongs is used. If no minimum
password length is configured for
the user group, the setting in
system view is used.
5. Configure the password
composition policy for the
local user.
password-control composition
type-number type-number [ type-
length type-length ]
Optional.
By default, the settings for the user
group to which the local user
belongs are used. If no password
composition policy is configured
for the user group, the settings in
system view are used.
Setting super password control parameters
CLI commands fall into these levels: visit, monitor, system, and manage, in ascending order.
Accordingly, login users fall into levels, each corresponding to a command level. A user of a certain
level can only use the commands at that level or lower levels.
To switch from a lower user level to a higher one, a user needs to enter a password for authentication.
This password is called a super password. For details on super passwords, see Fundamentals
Configuration Guide.
To set super password control parameters:

Table of Contents

Other manuals for HP A5830 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5830 Series and is the answer not in the manual?

HP A5830 Series Specifications

General IconGeneral
BrandHP
ModelA5830 Series
CategorySwitch
LanguageEnglish

Related product manuals