HP A5830 Series User Manual

124
[Device-GigabitEthernet1/0/1] port-security max-mac-count 64
# Set the port security mode to macAddressElseUserLoginSecure.
[Device-GigabitEthernet1/0/1] port-security port-mode mac-else-userlogin-secure
# Set the NTK mode of the port to ntkonly.
[Device-GigabitEthernet1/0/1] port-security ntk-mode ntkonly
3. Verify the configuration.
After completing the configurations, use the following command to view the port security configuration
information:
<Device> display port-security interface gigabitethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
GigabitEthernet1/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
Use the following command to view MAC authentication information:
<Device> display mac-authentication interface gigabitethernet 1/0/1
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 3
Current domain is mac
Silent MAC User info:
MAC Addr From Port Port Index
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 7
Max number of on-line users is 1024
Current online user number is 3
MAC ADDR Authenticate state Auth Index
1234-0300-0011 MAC_AUTHENTICATOR_SUCCESS 13
1234-0300-0012 MAC_AUTHENTICATOR_SUCCESS 14

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English