EasyManuals Logo

HP A5830 Series User Manual

HP A5830 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
12
Number Attribute Descri
p
tion
15 Login-Service Type of the service that the user uses for login.
18 Reply-Message
Text to be displayed to the user, which can be used by the server to
indicate, for example, the reason of the authentication failure.
26 Vendor-Specific
Vendor specific attribute. A packet can contain one or more such
proprietary attributes, each of which can contain one or more sub-
attributes.
27 Session-Timeout
Maximum duration of service to be provided to the user before
termination of the session.
28 Idle-Timeout
Maximum idle time permitted for the user before termination of the
session.
31 Calling-Station-Id
User identification that the NAS sends to the server. For the LAN
access service provided by an HP device, this attribute carries the
MAC address of the user in the format HHHH-HHHH-HHHH.
32 NAS-Identifier Identification that the NAS uses for indicating itself.
40 Acct-Status-Type
Type of the Accounting-Request packet:
1—Start
2—Stop
3—Interium-Update
4—Reset-Charge
7—Accounting-On (Defined in 3GPP, the 3rd Generation
Partnership Project)
8—Accounting-Off (Defined in 3GPP)
9 to 14—Reserved for tunnel accounting
15—Reserved for failed
45 Acct-Authentic
Authentication method used by the user:
1—RADIUS
2—Local
3—Remote
60 CHAP-Challenge
CHAP challenge generated by the NAS for MD5 calculation during
CHAP authentication.
61 NAS-Port-Type
Type of the physical port of the NAS that is authenticating the user:
15—Ethernet
16—Any type of ADSL
17—Cable (with cable for cable TV)
201—VLAN
202—ATM
If the port is an ATM or Ethernet port and VLANs are implemented on
it, the value of this attribute is 201.
79 EAP-Message
Used for encapsulating EAP packets to allow the NAS to authenticate
dial-in users via EAP without having to understand the EAP protocol.
80
Message-
Authenticator
Used for authentication and checking of authentication packets to
prevent spoofing Access-Requests. This attribute is used when RADIUS
supports EAP authentication.

Table of Contents

Other manuals for HP A5830 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5830 Series and is the answer not in the manual?

HP A5830 Series Specifications

General IconGeneral
BrandHP
ModelA5830 Series
CategorySwitch
LanguageEnglish

Related product manuals