HP A6616 User Manual

Figure 4-19
Pull out the RSE
 To protect the removed RSE
-

If you do not install a new RSE
the chassis. For how to install a blank panel, refer to “
on page 4-38.
Installing and
Removing a FIP
Interior Structure of a FIP
The router configured with the RPE
and FIP-210.
The router configured with the RSE
The FIP-100/FIP-
110 supports MIMs only, while the FIP
HIM/MIM intermixing.
Pull out the RSE
-X1
-
X1, place it in an antistatic bag.
If you do not install a new RSE
-
X1 in the slot, install a blank panel to prevent dust from entering
the chassis. For how to install a blank panel, refer to “
Installing and Removing a Blank Panel
Removing a FIP
Interior Structure of a FIP
The router configured with the RPE
-X1 supports four types of FIPs: FIP-
100, FIP
The router configured with the RSE
-X1 supports two types of FIPs: FIP-
100 and FIP
110 supports MIMs only, while the FIP
-200/FIP-
210 supports MIMs, HIMs, and
X1 in the slot, install a blank panel to prevent dust from entering
Installing and Removing a Blank Panel
”
100, FIP
-110, FIP-200,
100 and FIP
-200.
210 supports MIMs, HIMs, and

HP A6616 Specifications

General

Brand	HP
Model	A6616
Category	Network Router
Language	English