Memory Modules
Hardware and Software Guide 9–2
Expansion Memory Module Slot
To add or upgrade a memory module in the expansion memory
module slot:
1. Shut down the tablet PC. (If you are not sure whether the
tablet PC is off or in hibernation, turn the tablet PC on by
sliding the power switch toward the front of the tablet PC.
Then shut down the tablet PC through the operating system.)
2. Disconnect all external devices connected to the tablet PC.
3. Disconnect the power cord.
4. Turn the tablet PC upside down.
5. Remove any battery packs from the tablet PC.
6. Loosen the memory module cover screws 1.
7. Lift the memory module cover 2 away from the tablet PC.
To Next Page
Loading...
Need help?
General
