MultiBoot
Hardware and Software Guide B–6
Setting a MultiBoot Express Prompt
Use Computer Setup to set the tablet PC to display the MultiBoot
startup location menu each time the tablet PC is started or
restarted:
1. Open Computer Setup by turning on or restarting the
tablet
PC. Press f10 while the F10 = ROM Based Setup
message is displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select Advanced > Boot options, and
then press
enter.
3. In the Express Boot Popup Delay (Sec) field, select the
length of time in seconds that you want the tablet PC to
display the startup location menu before it defaults to the
current MultiBoot setting (when 0 is selected, the Express
Boot startup location menu is not displayed.)
4. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save changes and exit, and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup, and they
take effect when the tablet PC restarts.
To Next Page
Loading...
Need help?
General
