Modem and Networking
Hardware and Software Guide 11–7
4. If you continue to receive the “No Dial Tone” error
message after clearing the check box:
a. Select Start > Control Panel > Network and
Internet Connections > Phone and Modem
Options > Dialing Rules tab.
✎
The first time you select the Dialing Rules tab, you will be
prompted to enter your area code information in the Local
Information window.
b. Select your location and then select Edit.
c. Select the country/region from the drop-down list.
d. Select Apply > OK.
e. Select the Modems tab.
f. Select your modem and then select Properties.
g. Clear the Wait for dial tone before dialing
check
box.
Preinstalled Communication Software
To use preinstalled modem software for terminal emulation and
data transfer, follow these steps:
1. Select Start > All Programs > Accessories >
Communications.
2. Select the appropriate fax or terminal emulation program or
Internet connection wizard.
To Next Page
Loading...
Need help?
General
