Computer Setup
Hardware and Software Guide 15–5
Security Menu
Select This Option To Do This
Administrator password Enter, change, or delete an HP Administrator
password.
Power-On password Enter, change, or delete a power-on password.
Password options
■ Enable/Disable stringent security.
■ Enable/Disable required password on
restart.
DriveLock passwords Enable/Disable DriveLock; change a DriveLock
user or master password.
✎
DriveLock settings are accessible only
when you enter Computer Setup by
turning on (not restarting) the tablet PC.
Smart Card Security Enable/Disable power-on support for
smart
cards.
✎
This feature is supported by select smart
card readers only.
Embedded Security
■ Enable/Disable the embedded security
chip.
■ Restore embedded security chip to factory
settings.
■ Enable/Disable power-on authentication
support.
■ Enable/Disable automatic DriveLock.
■ Reset power-on authentication credential.
✎
Embedded Security settings are
accessible only if the tablet PC is
equipped with an embedded security
chip.
Device security
■ Enable/Disable devices in the system.
■ Enable NIC for inclusion in MultiBoot.
System IDs Enter user-defined identification values.
To Next Page
Loading...
