Computer Setup
Hardware and Software Guide 15–7
Advanced Menu
Select To Do This
Language (or press f2) Change the Computer Setup language.
Boot options
■ Enable/Disable MultiBoot, which sets a
startup sequence that can include most
bootable devices and media in the
system. For details, refer to Appendix B,
“MultiBoot.”
■ Set the boot order.
Device options
■ Swap the functions of the fn key and left
ctrl key.
■ Enable/Disable multiple pointing devices
at startup. (To set the tablet PC to support
only a single, usually nonstandard,
pointing device at startup, select Disable.)
■ Enable/Disable USB legacy support for a
USB keyboard, mouse, and hub. When
USB legacy support is enabled:
❐ A USB keyboard, mouse, and hub work
even when a Windows operating
system is not loaded.
❐ The tablet PC starts from a bootable
hard drive, diskette drive diskette, or
CD, CD-RW, or
DVD inserted into a
drive connected by a USB connector
to
the tablet PC or to an optional
docking device.
■ Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
■ Enable/Disable all settings in the
SpeedStep window. (When Disable
is selected, the tablet PC runs in Battery
Optimized mode.)
To Next Page
Loading...
