Q Menu Software
Hardware and Software Guide 12–6
Changing a User-Defined Item
User-defined items can be changed, but system-defined items
cannot be changed. If you select a system-defined item on the
Items To Display on Q Menu list, the Modify button is
unavailable.
To change the Display Name and/or File Name of a
user-defined
item:
1. Press the Q button or select the Q icon in the notification area
(at the far right of the taskbar).
2. Select Q Menu Settings.
3. Select the item on the Items To Display On Q Menu list.
4. Select Modify.
❏ To change the Display Name or File Name of the item
using the keyboard, type the new name for the item in the
Display Name field or type the new path to the
item in the
File Name field. If you prefer to type the Display Name,
but browse for the File Name, leave the
File Name field
blank.
❏ To change the Display Name or File Name by browsing,
select the Browse button beside the File Name field.
❏ In the window, select the item. (The full name of the item
is displayed in the File Name field and, if you did not type
a name earlier in the Display Name field, a Display Name
is generated from the item name and displayed in the
Display Name field.)
5. To confirm your preference(s), select Apply > OK.
6. To close the Q Menu Settings window, select OK.
To display the Q Menu after changing a Display and/or File
Name:
» Press the Q button or select the Q icon in the notification area
(at the far right of the taskbar).
To Next Page
Loading...
Need help?
General
