Pointing Devices and Keyboard
Hardware and Software Guide 3–18
You can turn the ambient light sensor on and off using the Quick
Launch Buttons software:
1. Open the Quick Launch Buttons software:
❏ Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
– or –
❏ Select the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select the Advanced tab.
3. Select or clear the Enable Ambient Light Sensor check box.
4. Select Apply, and then select OK.
You can turn the ambient light sensor on and off using the Quick
Launch Buttons icon:
1. Right-click the Quick Launch Buttons icon in the notification
area (at the far right of the taskbar) or Windows desktop.
2. Select Turn Ambient Light Sensor On or Turn Ambient
Light Sensor Off.
To Next Page
Loading...
Need help?
General
