Starting an Operating System Installation
E–4
Table E–1: Starting a Windows NT Workstation Installation
(continued)
Step Action Result or Displayed Text
9 Press [Enter] to continue. Setup has determined that your computer contains
the following hardware and software components:
Computer: Digital...
Display: Digital ZLXp-E
Keyboard: XT, AT, or Enhanced (83-102 keys)
Keyboard Layout: US
Pointing Device: MousePort Mouse
No Changes: The above list matches my
computer.
10 Select Display: (to load a video
driver).
Press [Enter].
You have asked to change the type of display to
be installed.
11 Insert the provided display driver
diskette.
Press [Enter].
You have chosen to change your computer's
display type to one supported by a hardware
manufacturer-supplied disk.
12 Select the appropriate display
driver.
Press [Enter].
You can choose your graphics card type from the
list displayed.
13 Select "The above list
matches my computer."
Press [Enter].
"The list below shows existing partitions and
spaces available for creating new partitions."
14 Select the desired disk.
Press [Enter].
Follow the on-screen instructions and continue the
installation. For more information, refer to the
Microsoft Windows NT Workstation System
Guide.
To Next Page
Loading...
