Starting an Operating System Installation
E–5
If you are installing the operating system on a disk that has not been partitioned and
formatted, refer to Table E–2.
Table E–2: Setting Up Partitions for a Windows NT Installation
Step Action Result
1 From the AlphaBIOS boot screen,
press [F2].
AlphaBIOS setup screen displays.
2 Select
Hard Disk Setup...
If disk 0 is not partitioned, a message asking if
you would like to proceed with default disk
partitioning displays.
3 Press [F10] to continue. Express Setup Complete screen displays.
4 Press [Enter]. A list of disks, including partitions, displays.
5 Press [Escape]. AlphaBIOS setup screen displays.
Refer to Table E–1 to re-attempt a Windows NT
installation.
To Next Page
Loading...
