turning the tweezers, wrap the tape around the tweezers as you continue to pull the tape out (3) from
behind the display panel. You must pull the tape multiple times before it is completely removed.
c. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front
of the display back cover.
d. Release the adhesive support strip (2) that secures the display panel cable to the back of the display
panel.
e. Release the retention bar (3) that secures the display panel cable to the back of the display panel.
64 Chapter 5Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
