HP EliteOne 800 G1 Service Manual

Top rear trim
Description Spare part number
Top rear trim 733506-001
The top rear trim is located along the top of the back of the computer.
To remove the top rear trim:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 34).
2. Remove the access panel (see
Access panel on page 40).
3. Rotate the bottom of the trim up and off the computer. When installed, the trim snaps in to place.
To install the top rear trim, reverse the removal procedures.
68 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis

HP EliteOne 800 G1 Specifications

General

RAM	DDR3
Memory	DDR3
Graphics	Intel HD Graphics 4600
Ports	4x USB 3.0, DisplayPort, VGA, RJ-45
Wireless	802.11a/b/g/n Wi-Fi, Bluetooth 4.0
Dimensions	56.09 x 5.28 x 38.28 cm (22.08 x 2.08 x 15.07 in)
Processor	Intel Core i3/i5/i7 (4th Gen)
Weight	8.4 kg