HP Envy 13 Series User Manual

Right side
Table 2-1 Right-side components and their descriptions
Component Description
(1) microSD™ memory card reader Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1. Hold the card label-side up, with connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is rmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory
card reader.
(2) USB port with HP Sleep and Charge Connects a USB device, provides high-speed data transfer, and
charges small devices, even when the computer is o.
(3) AC adapter and battery light ● White: The AC adapter is connected and the battery is fully
charged.
● Blinking white (select products only): The AC adapter is
disconnected and the battery has reached a low battery
level.
● Amber: The AC adapter is connected and the battery is
charging.
● O: The battery is not charging.
(4) Power connector Connects an AC adapter.
Right side 5

HP Envy 13 Series Specifications

General

Display Size	13.3 inches
Operating System	Windows 10 or Windows 11
Wireless	Wi-Fi 6 (802.11ax)
Resolution	1920 x 1080 (Full HD) or 3840 x 2160 (4K UHD)
Processor	Intel Core i5 or i7
RAM	8GB or 16GB
Storage	256GB, 512GB, or 1TB SSD
Battery Life	Up to 12 hours (varies by usage)
Bluetooth	Bluetooth 5.0
Ports	1 x USB Type-A, 1 x HDMI, 1 x Headphone/Microphone Combo
Webcam	720p HD camera