HP Envy 13 Series User Manual

Solid-state drive and Optane Memory Module
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
512 GB, PCIe, Gen 3 × 4 L85360-005
512 GB, PCIe, value L85364-005
256 GB, PCIe, Gen 3 × 4 L85350-005
256 GB, PCIe L85354-005
128 GB, SATA-3, TLC L85346-005
32 GB/512 GB, PCIe (Optane memory module/solid-state drive combination drive) L85366-005
16 GB PCle (Optane memory module/solid-state drive combination drive) L85372-005
1 TB M2 2280 PCIe-NVMe Value L85370-005
1 TB M2 2280 PCIe-NVMe 3 × 4 TLC SS L85348-005
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 37).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 38).
3. Remove the battery (see Battery on page 39).
To remove the solid-state drive:
NOTE: On select products, the size and shape of the Mylar cover may vary from the illustration.
1. Pull back the Mylar cover to access the solid-state drive bracket (1).
Component replacement procedures 43

HP Envy 13 Series Specifications

General

Display Size	13.3 inches
Operating System	Windows 10 or Windows 11
Wireless	Wi-Fi 6 (802.11ax)
Resolution	1920 x 1080 (Full HD) or 3840 x 2160 (4K UHD)
Processor	Intel Core i5 or i7
RAM	8GB or 16GB
Storage	256GB, 512GB, or 1TB SSD
Battery Life	Up to 12 hours (varies by usage)
Bluetooth	Bluetooth 5.0
Ports	1 x USB Type-A, 1 x HDMI, 1 x Headphone/Microphone Combo
Webcam	720p HD camera