HP Envy 13 Series User Manual

● Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.
● Set the location for downloading the diagnostic tools. This feature provides access to the tools from the
HP website or from a server that has been precongured for use. Your computer does not require the
traditional local storage (such as a hard drive or USB ash drive) to run remote diagnostics.
● Set a location for storing the test results. You can also set the user name and password that you use for
uploads.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take eect when the computer restarts.
Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) 71

HP Envy 13 Series Specifications

General

Display Size	13.3 inches
Operating System	Windows 10 or Windows 11
Wireless	Wi-Fi 6 (802.11ax)
Resolution	1920 x 1080 (Full HD) or 3840 x 2160 (4K UHD)
Processor	Intel Core i5 or i7
RAM	8GB or 16GB
Storage	256GB, 512GB, or 1TB SSD
Battery Life	Up to 12 hours (varies by usage)
Bluetooth	Bluetooth 5.0
Ports	1 x USB Type-A, 1 x HDMI, 1 x Headphone/Microphone Combo
Webcam	720p HD camera