HP FlexFabric 5700 series Configuration Guide

14
Table 1 FCoE features supported in different FCoE modes
FC and FCoE feature FCF mode NPV mode Transit mode
Configuring VFC
interfaces
Supported. Supported. Not supported.
Enabling FCoE Supported. Supported. Not supported.
Configuring VSANs Supported. Supported. Not supported.
Building a fabric Supported.
Only the Setting fabric timers
function is supported.
Not supported.
Configuring FC routing
and forwarding
Supported.
Only the following functions are
supported:
• Displaying FC routing table
information.
• Displaying FC FIB table
information.
• Display FC Exchange table
information.
Not supported.
Configuring FC zones Supported. Not supported. Not supported.
Configuring NPV Not supported. Supported. Not supported.
Configuring FIP
snooping
Not supported. Not supported. Supported.
Configuring FCS Supported. Not supported. Not supported.
Configuring FDMI Supported. Not supported. Not supported.
Configuring FC ping Supported. Not supported. Not supported.
Configuring FC tracert Supported. Not supported. Not supported.

HP FlexFabric 5700 series Specifications

General

Layer Support	L2/L3
Routing Protocol	OSPF, BGP, RIP, IS-IS, Static Routing
Remote Management Protocol	SNMP, CLI, Web
Features	VXLAN
Compliant Standards	IEEE 802.1D, 802.1Q, 802.1w, 802.1s, 802.3ad
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
VLANs	4K