HP FlexFabric 5700 series Configuration Guide

60
• An active/standby switchover.
GR involves the following roles:
• GR restarter—GR-capable device where a protocol restart or active/standby switchover occurs.
• GR helper—The GR restarter's neighboring device that assists in the GR process.
Configuring the GR restarter
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable FSPF GR.
fspf graceful-restart By default, FSPF GR is disabled.
3. Set the maximum FSPF GR
interval.
fspf graceful-restart interval
interval-value
The default setting is 120 seconds.
Configuring the GR helper
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable FSPF GR helper.
fspf graceful-restart helper
By default, FSPF GR helper is
enabled.
Displaying and maintaining FC routing and
forwarding
Execute display commands in any view and reset commands in user view.
Task Command
Display FC routing table information.
display fc routing-table [ vsan vsan-id ] [ statistics |
verbose ]
display fc routing-table vsan vsan-id fc-id [ mask |
mask-length ] [ verbose ]
Display FC FIB table information. display fc fib [ fcid [ mask-length ] ] vsan vsan-id
Display FC Exchange table information.
display fc exchange { link | protocol } [ slot slot-number ]
display fc exchange link verbose [ slot slot-number [ exid
exid ] ]
Display FSPF neighbor information. display fspf neighbor [ vsan vsan-id ]
Display link state database information. display fspf lsdb [ vsan vsan-id ]
Display FSPF GR state information. display fspf graceful-restart [ vsan vsan-id ]
Display FSPF statistics. display fspf statistics [ vsan vsan-id ]
Clear FSPF statistics. reset fspf counters [ vsan vsan-id ]

HP FlexFabric 5700 series Specifications

General

Layer Support	L2/L3
Routing Protocol	OSPF, BGP, RIP, IS-IS, Static Routing
Remote Management Protocol	SNMP, CLI, Web
Features	VXLAN
Compliant Standards	IEEE 802.1D, 802.1Q, 802.1w, 802.1s, 802.3ad
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
VLANs	4K