5
• The Length field (2 bytes long) indicates the length of the entire packet (in bytes), including the Code,
Identifier, Length, Authenticator, and Attributes fields. Bytes beyond this length are considered
padding and are ignored by the receiver. If the length of a received packet is less than this length,
the packet is dropped.
• The Authenticator field (16 bytes long) is used to authenticate responses from the RADIUS server and
to encrypt user passwords. There are two types of authenticators: request authenticator and
response authenticator.
• The Attributes field (variable in length) includes authentication, authorization, and accounting
information. This field can contain multiple attributes, each with the following subfields:
{ Type—Type of the attribute.
{ Length—Length of the attribute in bytes, including the Type, Length, and Value subfields.
{ Value—Value of the attribute. Its format and content depend on the Type subfield.
Commonly used RADIUS attributes are defined in RFC 2865, RFC 2866, RFC 2867, and RFC
2868. For more information, see "Commonly used standard RADIUS attributes."
Table 2 Commonly used RADIUS attributes
No. Attribute No.
Attribute
1 User-Name 45 Acct-Authentic
2 User-Password 46 Acct-Session-Time
3 CHAP-Password 47 Acct-Input-Packets
4 NAS-IP-Address 48 Acct-Output-Packets
5 NAS-Port 49 Acct-Terminate-Cause
6 Service-Type 50 Acct-Multi-Session-Id
7 Framed-Protocol 51 Acct-Link-Count
8 Framed-IP-Address 52 Acct-Input-Gigawords
9 Framed-IP-Netmask 53 Acct-Output-Gigawords
10 Framed-Routing 54 (unassigned)
11 Filter-ID 55 Event-Timestamp
12 Framed-MTU 56-59 (unassigned)
13 Framed-Compression 60 CHAP-Challenge
14 Login-IP-Host 61 NAS-Port-Type
15 Login-Service 62 Port-Limit
16 Login-TCP-Port 63 Login-LAT-Port
17 (unassigned) 64 Tunnel-Type
18 Reply-Message 65 Tunnel-Medium-Type
19 Callback-Number 66 Tunnel-Client-Endpoint
20 Callback-ID 67 Tunnel-Server-Endpoint
21 (unassigned) 68 Acct-Tunnel-Connection
22 Framed-Route 69 Tunnel-Password
23 Framed-IPX-Network 70 ARAP-Password
To Next Page
Loading...
Need help?
General