HP FlexFabric 5700 series User Manual

249
6. Make sure the certificate is within the validity period.
7. Configure the correct system time for the device.
8. If the problem persists, contact HP Support.
Failed to export certificates
Symptom
Certificates cannot be exported.
Analysis
• The PKI domain does not have local certificates when you export all certificates in PKCS12 format.
• The specified export path does not exist.
• The specified export path is invalid.
• The public key of the local certificate to be exported does not match the public key in the key pair
of the PKI domain.
• The storage space of the device is full.
Solution
1. Obtain or request local certificates.
2. Use mkdir to create the required path.
3. Specify a correct export path.
4. Configure the correct key pair in the PKI domain.
5. Clear up the storage space of the device.
6. If the problem persists, contact HP Support.
Failed to set the storage path
Symptom
The storage path for certificates or CRLs cannot be set.
Analysis
• The specified storage path does not exist.
• The specified storage path is illegal.
• The storage space of the device is full.
Solution
1. Use mkdir to create the path.
2. Specify a valid storage path for certificates or CRLs.
3. Clear up the storage space of the device.
4. If the problem persists, contact HP Support.

HP FlexFabric 5700 series Specifications

General

Layer Support	L2/L3
Routing Protocol	OSPF, BGP, RIP, IS-IS, Static Routing
Remote Management Protocol	SNMP, CLI, Web
Features	VXLAN
Compliant Standards	IEEE 802.1D, 802.1Q, 802.1w, 802.1s, 802.3ad
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
VLANs	4K