EasyManuals Logo

HP FlexFabric 5700 series User Manual

HP FlexFabric 5700 series
460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #232 background imageLoading...
Page #232 background image
220
Ste
Command
Remarks
7. Set the unit of the entity in
the organization.
organization-unit org-unit-name
By default, the unit is not set.
8. Set the state where the entity
resides.
state state-name By default, the state is not set.
9. Set the FQDN of the entity.
fqdn fqdn-name-string By default, the FQDN is not set.
10. Configure the IP address of
the entity.
ip { ip-address | interface
interface-type
interface-number }
By default, the IP address is not
configured.
Configuring a PKI domain
A PKI domain contains enrollment information for a PKI entity. It is locally significant and is intended only
for reference by other applications like IKE and SSL.
To configure a PKI domain:
Ste
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a PKI domain
and enter its view.
pki domain domain-name By default, no PKI domains exist.
3. Specify the trusted CA.
ca identifier name
By default, no trusted CA is
specified.
To obtain a CA certificate, the
trusted CA name must be provided.
The trusted CA name uniquely
identifies the CA to be used if
multiple CAs exist on the same CA
server. The CA server's URL is
specified by using the certificate
request url command.
4. Specify the PKI entity
name.
certificate request entity entity-name By default, no entity is specified.
5. Specify the type of
certificate request
reception authority.
certificate request from { ca | ra }
By default, no authority type is
specified.
6. Specify the certificate
request URL.
certificate request url url-string
By default, the certificate request
URL is not specified.
Do not configure this command
when you request a certificate in
offline mode.
7. (Optional.) Set the
SCEP polling interval
and maximum number
of polling attempts.
certificate request polling { count count |
interval minutes }
By default, the switch polls the CA
server for the certificate request
status every 20 minutes. The
maximum number of polling
attempts is 50.

Table of Contents

Other manuals for HP FlexFabric 5700 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP FlexFabric 5700 series and is the answer not in the manual?

HP FlexFabric 5700 series Specifications

General IconGeneral
Layer SupportL2/L3
Routing ProtocolOSPF, BGP, RIP, IS-IS, Static Routing
Remote Management ProtocolSNMP, CLI, Web
FeaturesVXLAN
Compliant StandardsIEEE 802.1D, 802.1Q, 802.1w, 802.1s, 802.3ad
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% (non-condensing)
VLANs4K

Related product manuals