HP FlexFabric 5700 series User Manual

316
Task Command Remarks
Connect to the SCP
server, and transfer files
with the server.
• In non-FIPS mode, connect to the IPv4 SCP server,
and transfer files with this server:
scp server [ port-number ] { put | get }
source-file-name [ destination-file-name ]
[ identity-key { dsa | ecdsa | rsa } | prefer-compress
zlib | prefer-ctos-cipher { 3des | aes128 | aes256 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] * [ publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
• In FIPS mode, connect to the IPv4 SCP server, and
transfer files with this server:
scp server [ port-number ] { put | get }
source-file-name [ destination-file-name ]
[ identity-key { ecdsa | rsa } | prefer-compress zlib |
prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In non-FIPS mode, connect to the IPv6 SCP server,
and transfer files with this server:
scp ipv6 server [ port-number ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | ecdsa |
rsa } | prefer-compress zlib | prefer-ctos-cipher
{ 3des | aes128 | aes256 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des }
| prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip
v6
ipv6-address } ] *
• In FIPS mode, connect to the IPv6 SCP server, and
transfer files with this server:
scp ipv6 server [ port-number ] [ -i interface-type
interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { ecdsa | rsa }
| prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher { aes128
| aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
[ publickey keyname | source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.

HP FlexFabric 5700 series Specifications

General

Layer Support	L2/L3
Routing Protocol	OSPF, BGP, RIP, IS-IS, Static Routing
Remote Management Protocol	SNMP, CLI, Web
Features	VXLAN
Compliant Standards	IEEE 802.1D, 802.1Q, 802.1w, 802.1s, 802.3ad
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
VLANs	4K