HP HPE FlexFabric 5901 Series - Installing the Switch

7
Installing the switch
CAUTION:
Keep the tamper
-
proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact HPE for permission. Otherwise, HPE shall not be liable for any consequence.
Figure 1 Hardware installation flow
Start
Install the switch
Ground the switch
Connect
power cords
Verify the installation
Turn on the circuit breaker
s
Operating correctly?
Turn off the circuit
breakers
Troubleshoot the switch
Yes
No
End
Install fan trays
Install power supplies
Install transceiver modules
and connect cables
Yes