HP HPE FlexFabric 5901 Series - SFP+ Port

42
NOTE:
USB devices from different vendors vary in compatibilities and drivers. HPE does not guarantee the
correct operation of USB devices from all vendors on the switch. If a USB device fails to operate on
the switch, replace it with one from another vendor.
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect the peer SFP+ ports over a
long distance, use SFP/SFP+ transceiver modules and fibers. To connect the peer SFP+ ports over
a short distance, use SFP/SFP+ cables. You can select the GE SFP transceiver modules and cables
in Table 14, 10-GE SFP+ transceiver modules in Table 15, and 10-GE SFP+ cables in Table 16 for
the SFP+ ports.
Table 14 GE SFP transceiver modules and cables available for the SFP+ ports
Product
code
HPE
description
Central
wavelength
(nm)
Conn
ector
Cable/fiber
diameter
(µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
JD118B
HPE X120 1G
SFP LC SX
Transceiver
850 LC
Multi-mode,
50/125
500 550 m (1804.46 ft)
400 500 m (1640.42 ft)
Multi-mode,
62.5/125
200 275 m (902.23 ft)
160 220 m (721.78 ft)
JD119B
HPE X120 1G
SFP LC LX
Transceiver
1310 LC
Single-mode,
9/125
N/A 10 km (6.21 miles)
Multi-mode,
50/125
500 or 400 550 m (1804.46 ft)
Multi-mode,
62.5/125
500 550 m (1804.46 ft)
JD098B
HPE X120 1G
SFP LC BX
10-U
Transceiver
TX: 1310
RX: 1490
LC
Single-mode,
9/125
N/A 10 km (6.21 miles)
JD099B
HPE X120 1G
SFP LC BX
10-D
Transceiver
TX: 1490
RX: 1310
JD103A
HPE X120 1G
SFP LC
LH100
Transceiver
1550 LC
Single-mode,
9/125
N/A
100 km (62.14
miles)
JD089B
HPE X120 1G
SFP RJ45 T
Transceiver
N/A RJ-45
Category-5
twisted pair
N/A 100 m (328.08 ft)