HP HPE FlexFabric 5930 - Appendix D: Cooling System; HPE 5930-32;HPE 5930-2 Slot Cooling System; HPE 5930-4 Slot Cooling System

8
Installing the switch in a 19-inch rack
IMPORTANT:
To close the rack door easily, make sure the rack depth is a minimum of 1000 mm (39.37 in).
Installation accessories
Table 5 Installation accessories
Switch model
Mounting
brackets
(provided)
Cable
management
brackets
Rack mounting rail kit
(provided)
• HPE 5930-32 QSFP+
• HPE 5930-32 QSFP+
TAA
1U high, one pair.
See Figure 2.
N/A
1U high, including one pair of
chassis rails and one pair of
slide rails. See Figure 5.
• HPE
5930-2Slot+2QSFP+
• HPE
5930-2Slot+2QSFP+
TAA-compliant
1U high, one pair.
See Figure 3.
N/A
1U high, including one pair of
chassis rails and one pair of
slide rails. See Figure 5.
• HPE 5930-4Slot
• HPE 5930-4Slot TAA
2U high, one pair.
See Figure 4.
One pair
(provided).
See Figure 4.
2U hig
h, including one pair of
chassis rails and one pair of
slide rails. See Figure 6.
Figure 2 Mounting brackets for the HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA switch