HP HPE FlexFabric 5930 - 1;10 Gbase-T Autosensing Ethernet Port Leds; Fan Tray Alarm Leds

61
Table 26 Management Ethernet port LED description for the HPE 5930-32 QSFP+/HPE
5930-32 QSFP+ TAA/HPE 5930-4Slot/HPE 5930-4Slot TAA switches
LED mark Status Description
LINK
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
ACT
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
The HPE 5930-2Slot+2QSFP+/HPE 5930-2Slot+2QSFP+ TAA switch provides a LINK/ACT LED for
the management Ethernet port.
Table 27 Management Ethernet port LED description for the HPE 5930-2Slot+2QSFP+/HPE
5930-2Slot+2QSFP+ TAA switch
LED mark Status Description
MGMT
LINK/ACT
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Flashing green The management Ethernet port is receiving or sending data.
Off The management Ethernet port is not connected.
1/10GBase-T autosensing Ethernet port LEDs
Table 28 1/10GBase-T autosensing Ethernet port LED description
Status Description
Steady green The port has a link and is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow The port has a link and is operating at 1 Gbps.
Flashing yellow The port is sending or receiving data at 1 Gbps.
Off No link is present on the port.
Fan tray alarm LEDs
The LSWM1BFANSC and LSWM1BFANSCB fan trays provide an Alarm LED.
Table 29 LSWM1BFANSC and LSWM1BFANSCB fan tray alarm LED description
Status Description
On The fan tray is faulty.
Off The fan tray is operating correctly.