46
The HPE 5930-2Slot+2QSFP+/HPE 5930-2Slot+2QSFP+ TAA switch comes with the two fan tray
slots empty. You must install two fan trays of the same model for the switch. In Figure 54, two
LSWM1HFANSC fan trays are installed in the fan tray slots. For more information about installing
and removing fan trays, "Installing/removing a fan tray."
Figure 55
Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
HPE 5930-4Slot/HPE 5930-4Slot TAA
Figure 56 Front panel
(1) Interface module slot 1 (2) Interface module slot 2
(3) Interface module slot 4 (4) Interface module slot 3
2
1
34
To Next Page
Loading...
