42 User Guide Integrated Lights-Out
NOTE: If the certificate is removed from your browser, if you have
upgraded the firmware, or if iLO is rebooted, the security alert message
will be displayed again. Unless a certificate generated by a CA has
been imported into iLO, iLO will generate a self-signed certificate each
time it reboots. This self-signed certificate is not as secure as a
certificate generated by a CA. (Refer to "Certificates (on page 140
)" to
import a certificate generated by a CA.) HP does not recommend using
a self-signed certificate, because this certificate will change everytime
iLO reboots. Also, some browsers do not allow easy editing of
previously stored certificates and may cause problems when attempting
to store a different certificate with the same name.
3. Install the default certificate to your browser:
NOTE: Unless you have installed a certificate generated by a CA, iLO
issues a self-signed certificate that lasts until iLO is reset for any
reason.
a. Click Install Certificate. The Certificate Import Wizard starts.
b. Click Next.
c. Click Next for the browser to automatically select the certificate store
when the Certificate Store window appears.
d. Click Finish when the Completing the Certificate Import Wizard
window appears.
e. Click Yes to confirm the installation of the default certificate when the
confirmation window appears.
f. Click OK to acknowledge that the certificate import was successful.
g. Click OK in the Certificate window to return to the Security Alert
window.
h. Click Yes in the Security Alert window to log in.
To Next Page
Loading...
