The ORCA main menu contains the following options:
• Create Logical Drive
• View Logical Drive
• Delete Logical Drive
NOTE: If you are configuring the HP Smart Array P700m/512 Controller or the HP StorageWorks
SB40c storage blade (P400 controller), then you can enter ORCA from POST by pressing the F8
key when prompted.
Creating a logical drive
1. At the ORCA main menu, select Create Logical Drive.
2. Select the physical disks to be included in the logical drive in the Available Physical Drives
section.
3. To select the Raid Configurations section and select the RAID type for the logical drive, press
Tab.
4. To select the Spare section and assign spare disks, as needed, press Tab.
5. To create the logical drive, press Enter. A summary of your choices appears.
136 Utilities
To Next Page
Loading...
