Rack options 4
Rack options
HP Seismic Rack
Additional documentation for the HP Seismic Rack can be found on the HP website
(http://www.hp.com/support/Seismic_Rack_UG_en).
HP Seismic Rack Casters
The seismic rack casters are designed for short-distance moves over smooth, hard surfaces or short-pile
carpeting. Carrier-grade racks do not support the use of an unloading ramp.
Shipping carton contents
• Seismic rack casters (4)
• Documentation
Required tools
The following tools are required for installation:
• Adjustable wrench
• 5/16-inch Allen wrench
Installing the seismic casters
l
WARNING: To reduce the risk of personal injury or damage to equipment, heed all warnings
and cautions throughout the installation instructions.
To Next Page
Loading...
Need help?
General