Rack options 8
4.
Install the seismic brace ("Installing the seismic brace" on page 10).
Shipping carton contents
• BLc7000 Seismic Brace
• BLc7000 Seismic Rack Mount Kit
• BLc7000 Cable Management System
• Documentation
Required tools
The following tools are required for installation:
• Torx screwdriver
Installing the rack mount bracket
NOTE: The U locations are noted in the following procedure for enclosures installed in the
lower portion of the rack. When installing multiple enclosures into the rack, use the U
locations in parentheses for the top enclosure.
1. Use a Torx screwdriver to screw the rack mount brackets into the top and middle holes of U1 and U2
(U12 and U13).
To Next Page
Loading...
