Making a Device Discoverable
When the HP iPAQ is discoverable, other devices with Bluetooth capabilities can detect, or discover,
the HP iPAQ and attempt to beam information to it, establish a partnership, or use a Bluetooth service.
1. Tap Start > iPAQ Wireless > Bluetooth tab > Bluetooth Settings> Accessibility tab.
2. Select the Allow other devices to connect and the Other devices can discover me check boxes.
3. Tap OK.
NOTE If you no longer want the HP iPAQ to be discoverable, clear the check boxes.
Opening Bluetooth Settings
1. Tap the iPAQ Wireless icon.
2. Tap the Bluetooth icon to turn on Bluetooth.
3. Tap the Bluetooth tab > Bluetooth Settings.
Setting Up an Incoming or Outgoing Bluetooth Serial (COM) Port
1. Be sure the HP iPAQ is connected to the other device via Bluetooth.
2. Tap Start > Settings > Connections tab.
3. Tap Bluetooth > Services tab.
4. Tap Serial Port > Advanced.
5. Select the Enable service check box.
6. To limit communication on this COM port to only devices with which the HP iPAQ has a Bluetooth
partnership, select the Authentication (Passkey) required check box.
7. Tap OK.
20 Chapter 2 Connections ENWW
To Next Page
Loading...
Need help?
General
