HP J2000 - Editing a Host; Editing the I;O Module Network Settings

3. Click Save.
4. Repeat to add Hosts.
5. (Optional) Select the edit icon (green pencil) to update the host details.
Editing a host
Prerequisites
Requires Administrator or Operator privileges
A host has been added to the J2000 on the HOSTS tab.
Procedure
1. In the WebUI, click HOSTS.
2. Select the host you want to edit.
3. Perform the following tasks, as necessary, to edit or remove a host:
• To edit the host name or NQN, click host name in the table.
• To add a Subsystem NQN, click the + sign.
• To remove a Subsystem NQN, click the - sign (displayed after a Subsystem NQN is added).
• To delete a host with no assigned Subsystem NQN, click Delete.
Editing the I/O module network settings
Prerequisites
Requires Administrator or Operator privileges
Procedure
1.
In the WebUI, click the IOMs tab.
2.
Select the IOM tab (IOM 1 or IOM 2) whose settings you want to change.
3. To access and change IOM network information, click Settings.
4. Click the Edit button on the bottom of the window.
5. Update the following information:
• Hostname
• Fully Qualified Domain Name (FQDN)
• DHCP Enabled Toggle
• DNS Servers
• IP Address
Operation
12