HP J9574A

10-84
IPv4 Access Control Lists (ACLs)
Adding or Removing an ACL Assignment On an Interface
Figure 10-22. Methods for Enabling and Disabling ACLs
HP Switch(config)# interface b10 ip access-group My-List in
HP Switch(config)# interface b10
HP Switch(eth-b10)# ip access-group 155 in
HP Switch(eth-b10)# exit
HP Switch(config)# no interface b10 ip access-group My-List
in
HP Switch(config)# interface b10
HP Switch(eth-b10)# no ip access-group 155 in
HP Switch(eth-b10)# exit
Enables a static port ACL
from the Global
Configuration level.
Enables a static port ACL
from a port context.
Disables a static port ACL
from the Global
Configuration level.
Uses a VLAN context to
disable a static port ACL.