13-34
Configuring Port-Based and User-Based Access Control (802.1X)
802.1X Open VLAN Mode
■ Unauthorized-Client VLAN: Configure this VLAN when unauthenti-
cated, friendly clients will need access to some services before being
authenticated or instead of being authenticated.
■ Authorized-Client VLAN: Configure this VLAN for authenticated clients
when the port is not statically configured as an untagged member of a
VLAN you want clients to use, or when the port is statically configured as
an untagged member of a VLAN you do not want clients to use. (A port
can be configured as untagged on only one port-based VLAN. When an
Authorized-Client VLAN is configured, it will always be untagged and will
block the port from using a statically configured, untagged membership
in another VLAN.) Note that after client authentication, the port returns
to membership in any tagged VLANs for which it is configured. See the
"Note", above.
To Next Page
Loading...
Need help?
General
