To Next Page

To Previous Page

13-67

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Figure 13-19. Example of Showing a VLAN with Ports Configured for Open VLAN Mode

HP Switch(config)# show vlan 1

Status and Counters - VLAN Information - VLAN 1

VLAN ID : 1

Name : DEFAULT_VLAN

Status : Static

Voice : No

Jumbo : No

Port Information Mode Unknown VLAN Status

---------------- -------- ------------ ----------

1 Untagged Learn Up

2 Untagged Learn Up

3 Untagged Learn Up

4 Untagged Learn Up

2 Untagged Learn Up

4 Untagged Learn Up

23 Untagged Learn Up

24 Untagged Learn Up

Overriden Port VLAN configuration

Port Mode

---- ----------

1 Untagged

3 Untagged

Note that ports 1 and 3 are not

in the upper listing, but are

included under “Overridden

Port VLAN configuration”. This

shows that static, untagged

VLAN memberships on ports 1

and 3 have been overridden by

temporary assignment to the

authorized or unauthorized

VLAN. Using the show port-

access authenticator < port-

list > command shown in figure

13-18 provides details.

HP J9574A Access Security Guide

Other manuals for HP J9574A