HP LaserJet Pro M129 - Send a fax; Fax from the flatbed scanner

Send a fax
●
Fax from the flatbed scanner
●
Fax from the document feeder (document feeder models only)
●
Use speed dials and group-dial entries
●
Send a fax from the software
●
Send a fax from a third-party software program, such as Microsoft Word
Fax from the flatbed scanner
1. Place the document face-down on the scanner
glass.
2. From the Home screen on the printer control
panel, touch the Fax
icon.
3. Use the keypad to enter the fax number.
4. Touch the Start Fax button.
5. The printer prompts you to confirm that you are
sending from the scanner glass. Touch the Yes
button.
6. The printer prompts you to load the first page.
Touch the OK button.
7. The printer scans the first page and then prompts
you to load another page. If the document has
multiple pages, touch the Yes button. Continue
this process until you have scanned all the pages.
8. When you have scanned the last page, touch the
No button at the prompt. The printer sends the
fax.
ENWW Send a fax 97