1. 2-line control panels: On the printer control panel, press the Setup button, and then open the
Network Setup menu.
Touchscreen control panels: From the Home screen on the printer control panel, select the Connection
Information
button.
2. Open the following menus:
●
Wi-Fi Direct
●
Settings (touchscreen control panels only)
●
On/Off
3. Touch the On menu item. Touching the Off button disables Wi-Fi Direct printing.
NOTE: In environments where more than one model of the same printer is installed, it might be helpful to
provide each printer a unique Wi-Fi Direct name for easier printer identification for Wi-Fi Direct printing. On
touchscreen control panels, the Wi-Fi Direct Name is also available by touching the Connection Information
icon from the Home screen on the printer control panel, and then touching the Wi-Fi Direct icon.
Change the printer Wi-Fi Direct name
Follow this procedure to change the printer Wi-Fi Direct name using the HP Embedded Web Server (EWS):
Step one: Open the HP Embedded Web Server
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
1. 2-line control panels: On the printer control panel, press the Setup button. Open the Network Setup
menu, and then select Show IP Address to display the IP address or host name.
Touchscreen control panels: From the Home screen on the printer control panel, touch the Connection
Information
button, and then touch the Network Connected button or the Network Wi-
Fi ON
button to display the IP address or host name.
56 Chapter 4 Print ENWW
To Next Page
Loading...