●
System Setup
●
Energy Settings
●
Sleep/Auto Off After
3. Use the arrow keys to select the time for the Sleep/Auto Off delay, and then press the OK button.
Select the time for the Sleep/Auto Off After delay.
Set the Shut Down After Inactivity delay and configure the printer to use 1 watt or
less of power
Use the control panel menus to set the amount of time before the printer shuts down.
NOTE: After the printer shuts down, the power consumption is 1 watt or less.
Complete the following procedure to change the Shut Down After Delay setting:
NOTE: The steps vary according to the type of control panel.
1 2 3
1 LED control panel
2 2-line control panel
3 Touchscreen control panel
LED control panels:
1. Open the HP Embedded Web Server (EWS):
a. Open the HP Printer Assistant.
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, select the icon with the printer's name,
and then open HP Printer Assistant.
b. In the HP Printer Assistant, select Print, and then select HP Device Toolbox.
2. Click the System tab, select the System Setup page, and then select the Energy Settings page.
3. In the Shut Down After area, select the time for the delay.
ENWW Energy-conservation settings 119
To Next Page
Loading...