HP LaserJet Pro M129 - Fax cuts off or prints on two pages

●
Check the toner cartridges and replace if necessary.
●
Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.
Fax cuts off or prints on two pages
●
Set the Default Paper Size setting. Faxes print on a single size of paper based on the Default Paper Size
settings.
2-line control panels
a. On the printer control panel, press the Setup
button.
b. Select System Setup, and then select Paper Setup.
c. Select Def. Paper Size, and then select the correct setting.
Touchscreen control panels
a. From the Home screen on the printer control panel, touch the Setup
button.
b. Select System Setup, and then select Paper Setup.
c. Select Paper Size, and then select the correct setting.
●
Set the paper type and size for the tray used for faxes.
●
Turn on the Fit to Page setting to print longer length faxes on letter or A4 size paper.
2-line control panels
a. On the printer control panel, press the Setup
button.
b. Select Fax Setup, and then select Recv. Fax Setup.
c. Select Fit to Page, and then select On.
Touchscreen control panels
a. From the Home screen on the printer control panel, touch the Setup
button.
b. Select Fax Setup, and then select Advanced Setup.
c. Select Fit to Page, and then select On.
NOTE: If the Fit to Page setting is off and the Default Paper Size setting is set to letter, a legal size original
prints on two pages.
ENWW Solve fax problems 183