Configure IP network settings
●
Introduction
●
Printer sharing disclaimer
●
View or change network settings
●
Rename the printer on a network
●
Manually configure IPv4 TCP/IP parameters from the control panel
●
Link speed setting
Introduction
Use the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP print drivers. Go to Microsoft at
www.microsoft.com.
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
1. Open the HP Embedded Web Server (EWS):
a. 2-line control panels: On the printer control panel, press the Setup
button. Open the Network
Setup menu, and then select Show IP Address to display the IP address or host name.
Touchscreen control panels: From the Home screen on the printer control panel, touch the
Connection Information
button, and then touch the Network Connected button or
the Network Wi-Fi ON
button to display the IP address or host name.
110 Chapter 8 Manage the printer ENWW
To Next Page
Loading...