HP LaserJet Pro M129 - Set the Delay Shut Down setting

NOTE: The default value is 4 hours.
2-line and touchscreen control panels:
1. On the printer control panel, open the Setup menu.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Shut Down After
3. Select the time for the Shut Down After delay.
NOTE: The default value is 4 hours.
Set the Delay Shut Down setting
Use the control panel menus to select whether or not the printer delays shutting down after the power
button is pressed.
Complete the following procedure to change the Delay Shut Down setting:
NOTE: The steps vary according to the type of control panel.
1 2 3
1 LED control panel
2 2-line control panel
3 Touchscreen control panel
LED control panels:
1. Open the HP Embedded Web Server (EWS):
a. Open the HP Printer Assistant.
120 Chapter 8 Manage the printer ENWW