4
Right arrow
button
Use this button to navigate through the menus or to increase a value that appears on the display.
5 Cancel
button Use this button to cancel a print job or to exit the control panel menus.
6
Start Copy
button
Use this button to start a copy job.
7
Number of Copies
button
Use this button to set the number of copies to be produced.
8
Lighter/Darker
button
Use this button to adjust the darkness setting for the current copy job.
9
Copy Menu
button
Use this button to open the Copy menu.
10 Alphanumeric keypad Use the keypad to provide fax numbers.
11
Fax Redial
button
Use this button to recall the fax number used for the previous fax job.
12
Start Fax
button
Use this button to start a fax job.
13 Setup
button Use this button to open the Setup menu.
14
Back arrow
button
Use this button for the following actions:
●
Exit the control-panel menus.
●
Scroll back to a previous menu in a submenu list.
●
Scroll back to a previous menu item in a submenu list (without saving changes to the menu
item).
15 Ready
LED The Ready light glows without blinking when the printer is ready to print. It blinks when the printer
is receiving print data or canceling a print job.
16 Attention
LED The Attention light blinks when the printer requires user attention, such as when the printer runs
out of paper or a toner cartridge needs to be changed. If the light glows without blinking, the
printer has experienced an error.
ENWW Printer views 7
To Next Page
Loading...