Hardware Options Installation
7. Align the heatsink assembly so that the processor fan cable can reach the
processor fan connector on the system board.
8. Install the heatsink assembly on the processor.
9. Close the retaining clips on both sides of the heatsink to secure the assembly.
10. Connect the processor fan to the processor fan connector on the system board.
11. Install the access panel. Refer to Chapter 2, “Server Operations.”
12. Install the front bezel. Refer to Chapter 2, “Server Operations.”
4-4 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: e-ch4 Hardware Options Installation.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:24 PM
To Next Page
Loading...
