Hardware Options Installation
5. Remove the CD-ROM from media bay 1:
a. Press the release latches on the CD-ROM drive.
b. Remove the CD-ROM drive from the media bay.
6. Install the CD-ROM drive in media bay 3.
CAUTION: Use care when sliding the CD-ROM drive into the bay. Excess force
can damage the system board.
4-24 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: e-ch4 Hardware Options Installation.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:24 PM
To Next Page
Loading...
